Custom Mat Builder — WellnessMats
WellnessMats

Custom Mat Builder

Runner Preview
○ Fallback texture

Request a Quote

Your configuration details and builder link will be included automatically.

How to Use the Custom Mat Builder

1
Set your width — Pick a standard width (24", 36", 47") or enter a custom width up to 60". Standard widths preserve the factory bevel on all edges.
2
Choose your measurement edge — Select Outside Edge (against wall/counter) or Inside Edge (room/island side). The tool calculates the opposite side automatically.
3
Enter segment lengths — Type measurements in the sidebar, or click the ✎ dimension labels on the drawing to edit inline.
4
Add turns — Click + Left or + Right to add segments with turns for L-shaped, U-shaped, or wraparound configurations.
5
Pick a color and Request Quote to email your configuration to our team.

Drawing Legend

■ Gold labels = outside edge (wall/counter side)
■ Blue labels = inside edge (room/walkway side)
■ Green overlay = beveled edge (factory finish)
■ Yellow overlay = semi-blunt (1" of 2" bevel kept)
■ Red overlay = blunt (bevel removed for custom width)
⋯ Dashed lines = puzzle-tooth seams between pieces

1
Enter dimensions — Type the target width and length in inches.
2
Review the layout — The drawing shows how your mat will be assembled from standard mat pieces, with beveled outside edges preserved.
3
Pick a color and Request Quote to email your configuration to our team.

Drawing Legend

■ Green overlay = beveled outside edges (always preserved)
⋯ Dashed lines = strip seams and piece connections
Click the ✎ width or length labels on the drawing to edit inline.

1
Enter first edge — Type the length of your first edge to begin building the shape.
2
Add turns + edges — Click + Left or + Right to add a turn. A popup lets you set the turn angle and next edge length. Arrow indicators on the drawing show which direction each turn will go.
3
Auto-closing — The tool automatically calculates the closing edge from your last point back to the start, including the angles at both ends.
4
Fine-tune — Edit any edge length or turn angle in the sidebar, or click the ✎ labels on the drawing. All values snap to 1 decimal place.
5
Pick a color and Request Quote to start a conversation with our team about feasibility.

CONCEPT TOOL ONLY

Custom shapes are NOT guaranteed to be producible. This tool helps communicate what you're looking for. Our team will review feasibility and advise on what can be manufactured.

PLEASE NOTE

This tool is a planning aid only and is not binding. Final sizes, cuts, seam placement, and layout will be finalized by our product engineering team. Estimated piece counts are approximate. All custom mats are subject to a final quote from WellnessMats.

Add Right Turn + Edge

90° = right angle right · 270° = right angle left

Mat Builder Wizard

All options can be changed after the wizard completes.